Aspire Nautilus Prime - Group image

Aspire Nautilus Prime

$40.99

The 40W Aspire Nautilus Prime is a premier pod system from Aspire with a 2000mAh built-in battery, a 3.4ml capacity pod, unique adjustable airflow and compatibility with your favorite Aspire Nautilus coils.

 

Designed with an anodized aluminum alloy frame, the Nautilus Prime device is sleek and angular, with a body that will fit comfortably in your palm. Aspire has added a dust and fingerprint resistant coating to the Prime to keep your mod looking new longer.

 

The Aspire ASP Chipset enables you to vape in variable voltage, variable wattage up to 40W, or BYPASS mode. Just press the adjustment buttons simultaneously to switch between modes. You’ll also find that the Prime starts heating your coil with an ultra-fast 0.001s firing speed, and comes with a full suite of battery protections.

 

The Aspire Nautilus Prime has a unique adjustable airflow system. Using the external adjustment slider, you can increase or decrease airflow in the independent airflow channel for a precise and custom vape experience. Turn up the airflow for bigger clouds or tighten it down for intense flavor.

 

With a 2000mAh built-in battery and 2A quick charging via the USB Type C port on the side of your device, you’ll be vaping all day with the Nautilus Prime. With an appropriate charging setup, the Prime will charge up to twice as quickly as previous, lower charge capacity Aspire devices.

 

What pods go with the Nautilus Prime?

 

Included in your Aspire Nautilus Prime kit is the 3.4ml Nautilus Prime Pod, featuring a convenient silicone-sealed side fill port and PCTG construction. To refill your Nautilus Prime Pod, just remove the pod from your Prime device, carefully lift the side fill seal and fill with e-liquid. Then gently but firmly re-seal the silicone plug, and you’re ready to vape! Be sure to allow new coils to prime (soak up e-liquid) for about five minutes after filling before you start to vape to prevent dry hits.

 

What coils can I use in the Nautilus Prime?

 

The Aspire Nautilus Prime is compatible with all Aspire Nautilus / Nautilus Mini coils. Included with this kit is an 0.7Ω Nautilus 2S Mesh coil rated for use between 20W - 25W and designed for mouth-to-lung or restricted direct-to-lung use. You’ll also find a 1.8Ω Nautilus BVC (bottom vertical) coil in your kit, ideal for use in variable voltage mode.

 

Aspire Nautilus Prime Includes:

 

(1) Aspire Nautilus Prime Mod

(1) 3.4ml Nautilus Prime Pod

(1) 0.7 ohm Nautilus 2S Mesh Coil

(1) 1.8 ohm Nautilus BVC Coil

(1) USB-C Cable

(1) User Manual

 

Aspire Nautilus Prime Features:

 

- Aspire ASP Chipset

- 2000mAh Built-In Battery

- 40W Max power

- 0.001s Firing Speed

- 0.69” OLED Screen

- Variable Voltage, Variable Wattage & BYPASS Modes

- External Adjustment Airflow System

- Pod Side-Fill Port

Silicon Fill Port Seal

- Compatible with All Nautilus Coils

- 510 Drip Tip

- USB Type-C Charging Port

- 2A Quick Charging

- Overtime Protection

Short Circuit Protection

- Overheat Protection

- Low Voltage Protection

- Overcharge Protection

- Overdischarge Protection

- Nautilus Prime RBA sold separately

 

Aspire Nautilus Prime Specifications:

 

Dimensions: 89.5mm x 45mm x 23mm

Weight: 118g

Material: Anodized Aluminum Alloy

Battery Capacity: 2000mAh

Max Power: 40W

Screen: 0.69” OLED

Charging Port: USB Type-C

Pod Capacity: 3.4ml

Pod Material: PCTG

Coil Compatibility: Aspire Nautilus Coils

 


Want to learn more about the Aspire Nautilus Prime?
Check out our infographic below.

 

Aspire Nautilus Prime Infographic

 

 

Disclaimer:

 

Please Note: There is always risk involved when using rechargeable batteries at any time and under any circumstances. Giant Vapes, LLC is not held responsible for any damage for any modification of the batteries, chargers, devices and other products that are sold on GiantVapes.com.

 

Giant Vapes, LLC will not be held liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) nor any rechargeable battery/batteries as well as chargers. Please have a great understanding of the batteries/chargers you are using and how to care for them properly. You can see a list of our recommendations for proper handling of rechargeable batteries in our terms and conditions, located HERE.

 

When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be aware that they are very sensitive to charging characteristics and could possibly explode or burn if mishandled. Please make sure that you have knowledge on all rechargeable batteries before you use them. Always charge batteries on a clean and fire-proof surface. Never leave charging batteries unattended. If you see that there is visible damage to a battery, please do not use it. Be sure to always store and transport the rechargeable cells in a safe, non-conductive container. Giant Vapes offers non-conductive battery containers for storage and travel HERE.

 

Please dispose of battery cells, chargers or any other electronic devices in accordance of local laws and mandates.

 

There are many places that will dispose of batteries properly for you. Please refer to the website call2recycle.org. They provide a public drop-off location within 10 miles of more than 87% of people living in the U.S.

 

If you have any further questions about batteries, feel free to check out the Lithium-Ion Battery section on our Terms of Use page HERE. You can also call, chat, or email our customer service team, as we are always happy to help.

Rated: Number of Reviews: